GSSHA™ Training, Omaha, NE, 2010 -- Tutorials and data files
From Gsshawiki
Contents
GSSHA Tutorials
The Raw Data is required to run most of the following tutorials. It is recommended to get the data in this folder before you proceed to any of these tutorials.
Some of the following tutorials will only work in WMS 8.4.
Volume I: WMS Basics
This tutorial deals with the following topics:
- Loading DEMs, Contour Options, Images, and Coordinate System
- Watershed Delineation using DEMs and 2D Grid Generation
- Creating Feature Objects and mapping them to 2D Grid
Volume II: GSSHA Modeling Basics
This tutorial deals with the following topics:
- GSSHA Initial Overland Flow Model Setup
- Correcting Overland Flow Problems
- Infiltration
- Using the Mapping Table and GIS Data to Define Variable Surface Roughness
- Stream Flow
- Developing GSSHA Model Using Hydrologic Modeling Wizard in WMS
- Post-Processing and Visualization of GSSHA Model Results
Volume III: GSSHA Applications
This tutorial deals with the following topics:
- Precipitation methods in GSSHA
- Analyzing the Effects of Land Use Change in GSSHA
- Long Term Simulations in GSSHA
- Simulating Sediment Transport in GSSHA
- Simulating Constituent Transport in GSSHA
- Overland Flow Boundary Conditions in GSSHA
Volume IV: GSSHA Calibration
This tutorial deals with the following topics:
- Manual Calibration of GSSHA Models
- Stochastic Simulations of GSSHA Models
- Automated Calibration of GSSHA Models
Volume V: Groundwater modeling in GSSHA
This tutorial deals with the following topics:
- Groundwater Modeling in GSSHA
- Advanced Groundwater Modeling in GSSHA
- Modeling Subsurface Tile and Storm Drains in GSSHA